-
Dynamic mic booster adds extra gain to your sound
-
High-quality preamp provides up to +25 dB of gain
-
Phantom powered with no need for external power supply
-
Works with almost any dynamic or passive ribbon microphone
-
Rugged, road-worthy construction for years of dependable use
-
3-Year Warranty Program*
-
Designed and engineered in the U.K.
-
Dynamic mic booster adds extra gain to your sound
-
High-quality preamp provides up to +25 dB of gain
-
Phantom powered with no need for external power supply
-
Works with almost any dynamic or passive ribbon microphone
-
Rugged, road-worthy construction for years of dependable use
-
Designed and engineered in the U.K.
-
VNET2 connection bridge for Dante* audio source
-
Convert Dante audio to analogue or AES3
-
Capable of driving 1 km of network cable
-
Rugged steel enclosure and connectors
-
Free-standing or rack-mounted options
-
Self-powered using Power over Ethernet (PoE)
-
Designed and engineered in the U.K.
-
VNET2 connection interface for AES3 audio sources
-
Sends AES3 digital audio VNET and control over the VNET2 network
-
Rugged steel enclosure and connectors
-
Free-standing or rack-mount options
-
Powered via the VNET network cable
-
Designed and engineered in the U.K.
-
USB or RS232 computer connection device for VNET
-
Capable of driving 1 km of network cable
-
Rugged steel enclosure and Ethercon connectors
-
Free-standing or rack-mount options
-
Self-powered via the USB cable
-
Designed and engineered in the U.K.
-
19" rack mount accessory for VNET interfaces
-
Accommodates up to 3 different devices
-
1 U rack space
-
Blanking plates supplied for unallocated slots
-
Designed and engineered in the U.K.
-
Power supply for VNET interface devices
-
Used when a Power Over Ethernet (PoE) Ethernet switch is not available
-
Power of up to two interfaces via A & B outputs
-
Designed and engineered in the U.K.
-
Ethernet computer connection device for VNET
-
Capable of driving 1 km of network cable
-
Rugged steel enclosure and Ethercon connectors
-
Free-standing or rack-mount options
-
Self-powered using Power Over Ethernet (POE)
-
Designed and engineered in the U.K.
-
Monitors networked QFLEX systems to provide complete system-wide monitoring and reporting for compliant PA/VA systems
-
Can be used standalone or with control PC running Tannoy PodWare Windows* software application
-
Isolated relay changeover switch contacts provide separate indication of Check and Fault conditions
-
Reports Check conditions for QFLEX speakers including temperature and driver impedance warnings
-
Reports Fault conditions for QFLEX speakers including missing pilot tone and out-of-range driver impedance, amplifier over-current and over-temperature and mains power
-
Reports Fault conditions for missing control PC or other devices on the network
-
Dedicated relay switch contacts provide automated fault responses
-
History log with Fault recording
-
Designed for use with PA/VA systems
-
Redundant monitoring capability when used with other SENTINEL devices
-
Front panel LCD display provides information on current status and what needs attention
-
Status indicator LEDs on front panel for System Normal, PC Online, PC Fault, Check System and System Fault conditions
-
Rugged 1U rackmount chassis designed for continuous use in demanding applications
-
Auto-ranging universal switch-mode power supply for use worldwide
-
Isolation module for QFLEX column loudspeakers
-
Allows large 'star' topology QFLEX VNET networks
-
Provides resilience to background noise over the network
-
Eliminates issues with floating mains ground potentials between nodes
-
Enables network connection testing before final system installation
-
Screw terminal wiring for ease of installation
-
Designed and engineered in the U.K.
-
Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
-
Length 50 metres
-
Tested for both AES50 and EtherSound* audio networking
-
Dual shielding for protection against EMI and ESD interference
-
Dual jacket construction with PUR and FRNC layers for enhanced cable resilience
-
Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
-
Robust and lightweight Schill* cable drum, with auxiliary winder and integrated break
-
Extend two 50 m cables to 100 m using optional Neutrik NE8FF connector (not included)
-
Rubber caps on etherCON connectors cover terminals during setup and transport
-
Velcro* straps secure cable ends during transportation
-
Designed and engineered in the U.K.
-
2-channel dynamic mic booster adds extra gain to your sound
-
High-quality preamps provide up to +25 dB of gain
-
Phantom powered with no need for external power supply
-
Works with almost any dynamic or passive ribbon microphone
-
Rugged, road-worthy construction for years of dependable use
-
Designed and engineered in the U.K.
-
LED lamp with 18" gooseneck shaft
-
Straight 4 pin male XLR connector
-
5 Watt power consumption @ 12 Volts DC
-
Warm white LED illumination for long term viewing comfort
-
Compatible with Littlite* 18X-4-LED lamp
-
Designed and engineered in the U.K.
-
USB 2.0 network module with up to 48 bidirectional channels @ 48 kHz and 24 bidirectional channels @ 96 kHz
-
Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
-
Simultaneous computer audio recording and playback
-
LED indication of sample rate
-
Windows* software driver available at klarkteknik.com
-
Designed and engineered in the U.K.
-
MADI (AES10-compliant) network module with up to 64 bidirectional channels @ 48 kHz and 32 bidirectional channels @ 96 kHz
-
Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
-
Operates up to 500 m over optical fibre link and 200 m over coaxial copper link
-
Optical transmission on SC-Duplex* connector
-
Copper transmission on 75 ohm coaxial BNC connectors
-
Dual-redundant operation with failover from optical to copper connections
-
Operates as either MADI clock master, MADI clock slave or from external clock via host unit
-
Designed and engineered in the U.K.
-
Audinate Dante* network module for Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
-
Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
-
Enables multichannel recording and playback through Dante Virtual Soundcard (PC or Mac* computer)
-
Primary and secondary Ethernet interfaces for dual-redundant Dante networking
-
Operates from internal Dante network Precision Time Protocol (PTP) clock or external clock via host unit
-
Optional Dante Controller software for remote configuration (PC or Mac computer)
-
LED indicators monitor network activity and speed
-
Designed and engineered in England
-
Dual port AES50 network module with up to 48 bidirectional channels @ 48 kHz and 96 kHz
-
Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
-
48 channel dual redundant operation @ 48 kHz
-
Independent 24 channel operation on each port @ 96 kHz
-
Operates from incoming AES50 clock or external clock via host unit
-
LED indicators display AES50 connection status
-
Designed and engineered in the U.K.
-
Single-channel, two-band equaliser based on the classic Pultec* EQP-1A
-
Class A, all discrete circuitry for highest signal integrity
-
Premium selection 12AX7 and 12AU7 tubes
-
Custom-built Midas input and output transformers
-
Switchable frequency selectors with up to 7 frequency points
-
Independent boost and cut controls provide immense creative potential
-
Variable bandwidth control for wide sound sculpting
-
Inductor based equaliser section
-
Bypass feature allows for A/B comparison
-
Transformer balanced inputs and outputs on Neutrik* XLR connectors
-
Rugged 2U rackmount chassis for durability in portable applications
-
Auto-ranging universal switch-mode power supply
-
Designed and engineered in the U.K.
-
Stereo transmitter to wirelessly stream audio (together with separate DW 20R)
-
Perfect for hospitality and event spaces, retail and home audio, etc.
-
Able to broadcast to multiple receivers (not included)
-
Digital 2.4 GHz wireless connectivity offers superior sound quality
-
High headroom design offers superior sound quality
-
Maximum wireless range 100 feet (30 m)
-
External, articulating antenna ensures optimum transmission and reception
-
Aluminium extrusion casing with protective rubber corners
-
Floor and wall mount brackets for fixed installation (included)
-
High quality Neutrik* XLR and 1/4" TRS connectors
-
2.4 GHz ISM band operation allows license-free use on a worldwide basis
-
Compact and rugged design
-
Designed and engineered in the U.K.
-
Stereo receiver to wirelessly stream audio (together with separate DW 20T)
-
Perfect for hospitality and event spaces, retail and home audio, etc.
-
Apply multiple DW 20R units for larger coverage
-
Digital 2.4 GHz wireless connectivity offers superior sound quality
-
High headroom design offers superior sound quality
-
Maximum wireless range 100 feet (30 m)
-
External, articulating antenna ensures optimum transmission and reception
-
Aluminium extrusion casing with protective rubber corners
-
Floor and wall mount brackets for fixed installation (included)
-
High quality Neutrik* XLR and 1/4" TRS connectors
-
2.4 GHz ISM band operation allows license-free use on a worldwide basis
-
Compact and rugged design
-
Designed and engineered in the U.K.