LAB.GRUPPEN
LAB.GRUPPEN
Sort by
Show result
  • 5,000 Watt amplifier with 4 flexible output channels and up to 2,000 Watts channel output for touring applications

  • Lake digital signal processing for unparalleled loudspeaker management and system control

  • Integrated 8x8 channels of dual redundant Dante* digital audio networking with AES67 support

  • 4 x 900 Watts into 2 Ohms, 4 x 1,250 Watts into 2.67 Ohms, 4 x 1,250 Watts into 4 Ohms, 4 x 1,250 Watts into 8 Ohms, 4 x 700 Watts into 16 Ohms

  • Proven and reliable IDEEA output stage with high-efficiency cooling system

  • Rational Power Management (RPM) provides total flexibility to allocate available power across all 4 output channels

  • Best-in-class Power Factor Correction (PFC) with Current Draw Modeling reduces running costs and minimizes environmental impact

  • Under-Voltage Limiting (UVL) for continued operation during severe mains supply voltage drops

  • Dedicated on-board surveillance and load monitoring for complete peace of mind

  • Redundant audio inputs and on-board system surveillance for full system security

  • Backlit, white-on-black front panel display and menu navigation buttons

  • 100 user presets for simple and efficient system configuration and set-up

  • Front-to-rear airflow fans with temperature control for optimal speed and reduced noise

  • 4 "Lake Class" analog input channels with Iso-Float ground isolation

  • 4 input channels of AES/EBU (AES3) digital audio supporting all standard sample rates up to 192 kHz with 24-bit resolution

  • 2 Neutrik etherCON* RJ-45 ports provide dual redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software

  • Balanced analog and AES/EBU audio inputs on Neutrik* XLR connectors

  • 4 NL4 Neutrik speakON* and 4 binding post output connectors

  • Detachable locking IEC cable rated at 250 V / 15 Amp

  • Removable dust filter grilles for increased air circulation

  • Rugged 2U rackmount chassis for durability in touring applications

  • Designed and engineered in Sweden

RM0.00
  • 20,000 Watt amplifier with 4 flexible output channels and up to 5,900 Watts channel output for touring applications

  • Lake digital signal processing for unparalleled loudspeaker management and system control

  • Integrated 8x8 channels of dual redundant Dante* digital audio networking with AES67 support

  • 4 x 4,400 Watts into 2 Ohms, 4 x 5,000 Watts into 2.67 Ohms, 4 x 4,400 Watts into 4 Ohms, 4 x 2,300 Watts into 8 Ohms, 4 x 1,150 Watts into 16 Ohms, 4 x 3,300 Watts into Hi-Z 70 V, 4 x 4700 Watts into Hi-Z 100 V

  • Proven and reliable Class-TD output stage with proprietary Intercooler high-efficiency cooling system

  • Rational Power Management (RPM) provides total flexibility to allocate available power across all 4 output channels

  • Best-in-class Power Factor Correction (PFC) with Current Draw Modelling reduces running costs and minimizes environmental impact

  • Under-Voltage Limiting (UVL) for continued operation during severe mains supply voltage drops

  • Dedicated on-board surveillance and load monitoring for complete peace of mind

  • Redundant audio inputs and on-board system surveillance for full system security

  • Backlit, white-on-black front panel display and menu navigation buttons

  • 100 user presets for simple and efficient system configuration and set-up

  • 3 front-to-rear airflow fans with temperature control for optimal speed and reduced noise

  • 4 "Lake Class" analog input channels with Iso-Float ground isolation

  • 4 input channels of AES/EBU (AES3) digital audio supporting all standard sample rates up to 192 kHz with 24-bit resolution

  • 2 Neutrik etherCON* RJ-45 ports provide dual redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software

  • Balanced analog and AES/EBU audio inputs on Neutrik* XLR connectors

  • 1 NLT8 and 2 NLT4 Neutrik speakON* output connectors

  • Detachable Neutrik powerCON* cable rated at 250 V / 32 A

  • Removable dust filter grilles for increased air circulation

  • Rugged 2U rackmount chassis for durability in touring applications

RM0.00
  • 12,000 Watt amplifier with 4 flexible output channels and up to 5,900 Watts channel output for touring applications

  • Lake digital signal processing for unparalleled loudspeaker management and system control

  • Integrated 8x8 channels of dual redundant Dante* digital audio networking with AES67 support

  • 4 x 3,000 Watts into 2 Ohms, 4 x 3,000 Watts into 2.67 Ohms, 4 x 3,000 Watts into 4 Ohms, 4 x 1,900 Watts into 8 Ohms, 4 x 950 Watts into 16 Ohms, 4 x 3,000 Watts into Hi-Z 70 V, 4 x 3,000 Watts into Hi-Z 100 V

  • Proven and reliable Class-TD output stage with proprietary Intercooler high-efficiency cooling system

  • Rational Power Management (RPM) provides total flexibility to allocate available power across all 4 output channels

  • Best-in-class Power Factor Correction (PFC) with Current Draw Modelling reduces running costs and minimizes environmental impact

  • Under-Voltage Limiting (UVL) for continued operation during severe mains supply voltage drops

  • Dedicated on-board surveillance and load monitoring for complete peace of mind

  • Redundant audio inputs and on-board system surveillance for full system security

  • Backlit, white-on-black front panel display and menu navigation buttons

  • 100 user presets for simple and efficient system configuration and set-up

  • 3 front-to-rear airflow fans with temperature control for optimal speed and reduced noise

  • 4 "Lake Class" analog input channels with Iso-Float ground isolation

  • 4 input channels of AES/EBU (AES3) digital audio supporting all standard sample rates up to 192 kHz with 24-bit resolution

  • 2 Neutrik etherCON* RJ-45 ports provide dual redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software

  • Balanced analog and AES/EBU audio inputs on Neutrik* XLR connectors

  • 1 NLT8 and 2 NLT4 Neutrik speakON* output connectors

  • Detachable Neutrik powerCON* cable rated at 250 V / 32 A

  • Removable dust filter grilles for increased air circulation

  • Rugged 2U rackmount chassis for durability in touring applications

RM0.00
  • Two channel amplifier delivering 2 x 1,500 Watts

  • Full DSP feature set for speaker processing

  • Proven and reliable Class-D amplifier stage

  • Highly efficient Switch Mode Power Supply (SMPS)

  • Comprehensive configuration and monitoring software through USB connection

  • Intuitive front panel user interface for easy setup and monitoring

  • Precise power management guarantees performance and efficiency

  • Comprehensive circuit protection against short circuits, DC and thermal overload

  • User configurable gain, delay, crossover, EQ, limiter and dynamic EQ

  • Speaker Protect Limiter for maximum level output and reliable driver protection

  • Pre-configured crossover settings for speaker configuration

  • Balanced XLR and TRS input connectors with optimised sensitivities

  • Professional speakON* output connectors

  • Front panel locking functionality for ultimate security

  • Efficient cooling with temperature-controlled fan

  • Rugged and lightweight rack mount chassis for maximum durability

  • Designed and engineered in Sweden

RM3,749.00
  • Two channel amplifier delivering 2 x 1,500 Watts

  • Precise power management guarantees performance and efficiency

  • Proven and reliable Class-D amplifier stage

  • Highly efficient Switch Mode Power Supply (SMPS)

  • Speaker Protect Limiter for maximum level output and reliable driver protection

  • Accurate 8-segment Signal and Limit LEDs for performance monitoring

  • Integrated crossover with low-cut, high-cut and full range mode

  • Comprehensive circuit protection against short circuits, DC and thermal overload

  • Balanced XLR and TRS input connectors with optimised sensitivities

  • Professional speakON* output connectors

  • Efficient cooling with temperature-controlled fan

  • Rugged and lightweight rack mount chassis for maximum durability

RM2,999.00
  • Compact matrix amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • 4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Compact amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipatio

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Compact mono amplifier which offers 60 W for high impedance speakers on 70 V distribution lines

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs 

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load 

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Compact matrix amplifier which offers full output power across a range of loads with 2 x 120 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • 4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class D amplifier with patented design for low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

  • Designed and engineered in Sweden

RM0.00
  • Compact amplifier which offers full output power across a range of loads with 2 x 120 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

  • Designed and engineered in Sweden

RM0.00
  • Compact mono amplifier which offers 240 W for high impedance speakers on 70 V distribution lines

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Compact matrix amplifier which offers full output power across a range of loads with 2 x 60 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • 4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Compact amplifier which offers full output power across a range of loads with 2 x 60 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Compact mono amplifier which offers 120 W for high impedance speakers on 70 V distribution lines

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

RM0.00
  • Stylish tabletop volume controller with high resolution

  • Fixed cable with RJ-45 connector for simple extension

  • Connect to the Remote port on any Lab Gruppen Commercial Install Series model or wire up to the GPI port on any LUCIA model

  • Configurable to operate from 1 up to 4 ganged output channel volume

  • Brushed aluminum high quality finish

  • Rubberized base plate for non slip operation

RM0.00
  • Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications

  • Low mains current draw with proven IDEEA technology for power conservation

  • Highly advanced DSP with 40 real-time multi-slope Parametric EQ's

  • 100 user presets for system configuration and setup

  • Networked control via IntelliDrive Controller and touchscreen?user interface

  • AES3 and analogue inputs with redundant failover

  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection

  • 4-channel input mixer for multi-input mixing and switching

  • Backlit display with navigation buttons and encoder for front panel setup

  • Horizontal output VU meters on display in operating mode

  • Binding post and Neutrik speakON* connectors

  • Universal power supply supports 100 - 240 V at 50 or 60 Hz

  • Fast network setup with auto-discovery and identification of amplifiers

RM0.00
  • 2 x 60 Watt amplifier for commercial and industrial applications

  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter

  • Direct drive, constant power technology for superior audio performance and reliability

  • Dante* audio connectivity to enable creating large audio systems over a local network

  • Energy Star* certified design conserves energy and drastically reduces operational cost

  • GPI remote volume control using standard RJ-45 connector and Ethernet cable

  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings

  • Tamperproof gain controls for each channel on rear panel location

  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting

  • Euroblock type amplifier output connectors

  • Convection-cooled, fan-less amplifier technology for low noise

  • Comprehensive fail safe circuit protection ensures continued operation

RM0.00
  • 2 x 240 Watt amplifier for commercial and industrial applications

  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter

  • Direct drive, constant power technology for superior audio performance and reliability

  • Dante* audio connectivity to enable creating large audio systems over a local network

  • Energy Star* certified design conserves energy and drastically reduces operational cost

  • GPI remote volume control using standard RJ-45 connector and Ethernet cable

  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings

  • Tamperproof gain controls for each channel on rear panel location

  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting

  • Euroblock type amplifier output connectors

  • Convection-cooled, fan-less amplifier technology for low noise

  • Comprehensive fail safe circuit protection ensures continued operation

RM0.00
  • 2 x 120 Watt amplifier for commercial and industrial applications

  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter

  • Direct drive, constant power technology for superior audio performance and reliability

  • Dante* audio connectivity to enable creating large audio systems over a local network

  • Energy Star* certified design conserves energy and drastically reduces operational cost

  • GPI remote volume control using standard RJ-45 connector and Ethernet cable

  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings

  • Tamperproof gain controls for each channel on rear panel location

  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting

  • Euroblock type amplifier output connectors

  • Convection-cooled, fan-less amplifier technology for low noise

  • Comprehensive fail safe circuit protection ensures continued operation

RM0.00