|Size (L x W x H)||58 cm x 37 cm x 23 cm|
Malaysia Not Applicable
- 120 and 240 W power amplifier in a compact housing
- 1 V line level balanced input
- 70 V, 100 V and 8 ohm outputs
- 100 V input for slave operation on 100 V speaker line
- Temperature-controlled forced front to back ventilation (directly stackable)
The PLE-1P120-EU and PLE-1P240-EU are two highpower plug-and-play cost effective power amplifiers that deliver 120 and 240 Watts to constant voltage or 8 ohm loads. Built with premium quality and protections, they offer basic functionality at a budget price. The amplifiers offer straight 1 V and 100 V line in, and 70 V, 100 V and 8 ohms out. They can extend the power of the PLE- series mixer amplifiers or be combined with the PLE-10M2-EU mixer, or work anywhere where more power on an existing 100 V line is needed or when a line level signal is provided.
The amplifier is protected against overload and short circuits. A limiter protects the amplifier and loudspeaker against accidental overdriving. A temperature-controlled fan ensures proper cooling without producing acoustic noise at lower output levels.
Power input and output
The unit operates both on mains power and on a 24 V battery power supply for emergency back up, with automatic switchover. The amplifier also has a built‑in charger to charge the connected battery. The system has a balanced input and loop‑through facility. This makes it easy to connect multiple amplifiers.secondary input is a 100 V line input to connect the amplifier to a 100 V loudspeaker line to provide more power in remote locations. Gain or level control is located on the rear of the unit to avoid accidental setting change. A meter with LED bar shows the output level. The amplifier has a 70 V or 100 V output for constant voltage loudspeaker systems, and a low impedance output for 8 ohm loudspeaker loads.
Power Amplifier x1