Check Your Cables!

Make sure your gear is ready to go with the Behringer Cable Tester CT100. Bad cables can instantly ruin your gig or session. The CT100 cable tester is the perfect, and inexpensive, way to find bad cables fast. This compact unit tests the most common audio cables including XLR, TRS, MIDI, and more. You even get to choose from three testing modes. Sweetwater knows that keeping your studio or live rig running in top shape is important to you, and we're confident that the Behringer Cable Tester CT100 can help make that a reality.

• Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
• Accepts all standard connectors: XLR, TRS (1/4", 1/8", TT), RCA and MIDI
• Super-easy operation with intuitive LED display
• Continuity check and intermittent contact detection

• Phantom-power and ground-shield check
• Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Belt clip included
• Operates with 2 AA size batteries (not included)

• Designed and engineered in Germany

• Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
• Accepts all standard connectors: XLR, Speakon*, TRS (1/4", 1/8"), RCA, RJ45, MIDI and USB
• Super-easy operation with intuitive LED display
• Continuity check and intermittent contact detection
• Phantom-power and ground-shield check
• Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Operates with 2 AA size batteries (not included)
• Designed and engineered in Germany

• 1.7 A current capacity can power more than 20 effects pedals, keyboards and other DC 9 V gear
• Supplied with a full complement of connectors and jumper cords for total compatibility
• Includes 4 assorted jumper cables and 2 daisy-chain cables each with 5 connectors
• Takes up only one outlet space and frees up more room for your pedals
• Runs on any AC power supply from 100 – 240 V; worldwide usability without transformer
• Transformerless design eliminates 50/60-cycle hum and extraneous noise
• Designed and engineered in Germany

• 32-channel live recording and playback on dual SD/SDHC cards
• Up to 3 hours of 48 kHz/32-bit PCM recording of 32 channels in one session, stored as uncompressed WAV files
• 32-channel, bi-directional USB 2.0 audio/MIDI interface for studio and live recording
• Independent operation of SD cards and USB recording / playback
• Remote control via PC, Android* or iPad* apps, assignable controls or compatible hardware control surfaces, such as the BEHRINGER X-TOUCH
• Dual SD card slots to keep virtual sound check and live performance files separately available or for extended recording time
• Unique sample-synchronized automatic spanning feature allows extending a session across both SD cards for more than 12 hours of 8-track recording time non-stop
• Instantaneous live playback with preload and markers in the console UI and remote apps
• Markers can be set on the fly for identifying song positions while recording or playing back
• All markers can be edited directly in the console GUI
• Allows employing PC “Plug Ins” for outboard effects processing via USB
• Channel routing can be stored and automated for record/playback
• Secure file handling in the event of power blackout (optional CR123A Lithium cell required)
• HUI/Mackie Control* emulation for controlling of any compatible DAW software from the console surface
• Compatible with CoreAudio on Mac OSX*
  - ultra-low latency ASIO* drivers for Windows* PC available
• 3-Year Warranty Program*
• Designed and engineered in Germany

Professional assembled balanced cable with PROEL XLR 3P male cable mount

PROEL XLR 3P female cable mount, metal housing and backshell connections/XLR3FVPRO - HPC225 - XLR3MVPRO.

Length: 2 m. Available in Black.

Other available lengths: refer to the technical specifications

Professional assembled balanced cable with PROEL XLR 3P male cable mount

PROEL XLR 3P female cable mount, metal housing and backshell connections/XLR3FVPRO - HPC225 - XLR3MVPRO.

Length: 20 m. Available in Black.

Other available lengths: refer to the technical specifications

Heavy-duty professional loudspeakers stand, made of tubular steel and die cast aluminum parts. Featuring exclusive automatic elevation mechanism powered by an internal system of compressed air, which helps to raise the loudspeaker without effort. Maximum height 2000 mm. Matt black finishing.

Pair of loudspeaker stands, made of steel and nylon parts with additional glass fiber, to ensure high reliability and resistance. Steel legs joint. Scratchresistant matte black finish. Equipped with height adjustment screw system and steel safety pin. Supplied with a practical Nylon210D carrying bag.

• Base dimension: Ø 1320 mm
• Minimum height: 1350 mm
• Maximum height: 2150 mm
• Weight: 1,70 kg
• Maximum loading weight: 35 kg
• Available color: Matt black
• Upper end tube: Ø 35 mm

• Deluxe water resistant protective cover for power stand subwoofer
• Rugged black multi-layer nylon outer material prevents ingress of dirt and dust
• Thick interior foam padding provides superior protection in transit
• Openings in cover allow access to built-in cabinet handles
• Ideal for Turbosound iP2000 power stand
• Designed and engineered in the U.K.

• Deluxe water resistant protective cover for power stand subwoofer
• Rugged black multi-layer nylon outer material prevents ingress of dirt and dust
• Thick interior foam padding provides superior protection in transit
• Openings in cover allow access to built-in cabinet handles
• Ideal for Turbosound iP3000 power stand
• Designed and engineered in the U.K.

• Deluxe water resistant transport bag for synthesizers etc.

• Rugged black multi-layer nylon outer material prevents ingress of dirt and dust

• Thick interior foam padding provides superior protection in transit

• Integral carry handles and shoulder strap

• Ideal for Behringer DEEPMIND 12 Polyphonic Synthesizer

• Designed and engineered in the U.K.

• Deluxe water resistant transport bag for desktop synthesizers

• Rugged black multi-layer nylon outer material prevents ingress of dirt and dust

• Thick interior foam padding provides superior protection in transit

• Integral carry handles and shoulder strap

• Ideal for Behringer DEEPMIND 12D Polyphonic Synthesizer

• Designed and engineered in the U.K.

• Deluxe water resistant transport bag for synthesizers etc.

• Rugged black multi-layer nylon outer material prevents ingress of dirt and dust

• Thick interior foam padding provides superior protection in transit

• Integral carry handles and shoulder strap

• Ideal for Behringer DEEPMIND 6 Polyphonic Synthesizer

• Designed and engineered in the U.K.

• Stereo line in to USB interface cable

• Dual mono 1/4? jack connectors

• Ideal for recording electronic musical instruments

• 2 meter (6.6 foot) cable length

• Simple Plug-and-Play connection to Mac* and PC computers

• Digital audio output operates at 44.1 kHz and 48 kHz sample rates

• Compatible with most 32-bit Mac and Windows* drivers and software

• Microphone to USB interface cable

• XLR input connector

• Ideal for recording vocals and speech with dynamic microphones

• 5 meter (16.5 foot) cable length

• Simple Plug-and-Play connection to Mac* and PC computers

• Digital audio output operates at 44.1 kHz and 48 kHz sample rates

• Compatible with most 32-bit Mac and Windows* drivers and software

• Premium passive stereo volume controller and attenuator

• Active-free circuitry guarantees purest signal path

• Large Volume knob for extremely precise level adjustments

• 2 high-quality XLR combo inputs and 3.5 mm (1/8") stereo input perfectly connect to your DAW

• 2 high-quality XLR outputs and 3.5 mm (1/8") stereo output to connect to your studio monitors

• Designed and engineered in Germany

• In-ear monitor amplifier for personal monitor applications
• High power and "drummer proof" headphones output
• Dual XLR inputs allow for 2-channel mono or stereo operation
• Switchable stereo/mono operation with mix function
• Level and Balance/Mix controls
• Runs up to 12 hours on a 9 V battery (not included)
• Battery control with dual LED indicators

• Operates on Behringer PSU-SB DC power supply (not included)
• Integrated current limit protects your ears and headphone
• Convenient belt-pack clip included
• Mounts easily on a standard mic stand with 5/8” and 3/8” thread
• "Built-like-a-tank", impact-resistant metal chassis

• Distribution Hub for P16-I for system expansion
• 1 ULTRANET input feeds 8 ULTRANET outputs (RJ-45)
• Provides bus-power and 16-channel signal transmission for all 8 outputs
• Up to six P16-D ULTRANET Distributors can be combined for a total of forty-eight P16-M Personal Mixers

• Status LED indicators for RJ-45 input and 8 RJ-45 outputs
• Internal autorange power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving

• Mounting bracket for P16-M Digital Personal Mixer
• Attaches to standard mic, music or drum stands

• In-ear monitor amplifier for personal monitor applications
• Ultra-compact and lightweight design
• High power and "drummer proof" headphones output
• XLR and TRS input connector with locking mechanism
• Level control with power on/off switch
• Stereo/mono source switch (internal)
• Runs up to 12 hours on 2 AAA batteries (not included)

• Battery control with LED indicators
• Integrated current limit protects your ears and headphone
• Convenient belt-pack clip included
• "Built-like-a-tank", impact-resistant metal chassis

• In-ear monitor belt-pack for personal monitor applications
• High quality volume control
• XLR input with locking mechanism
• 3.5 mm mini jack headphones connector

• Convenient belt-pack clip included
• "Built-like-a-tank", impact-resistant metal chassis

• Professional patchbay eliminates cable clutter in your studio and adding order and clarity

• Fully balanced high-quality ¼” TRS connectors

• 3 modes, easily selectable per channel via top-side switches

• "Normal" interconnects the two rear jacks of one channel; inserting a plug into one of the front jacks interrupts the connection of the rear jacks

• "Thru" interconnects each rear jack with its corresponding front jack

• "Half Normal" interconnects the two rear jacks of one channel; inserting a plug into the lower front jack interrupts the connection of the rear jacks

• Designed and engineered in Germany

• 64-channel 48 kHz, bi-directional audio interface for Dante* IP networks

• Low-latency 24-bit signal transmission with sample-accurate synchronization

• Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS

• Mixed sample and bit rates can coexist on the same Dante network

• WING remote control possible on the same network, using the integrated Ethernet switch

• Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices

• Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)

• Secondary connection can be configured for seamless redundant audio networking

• 32-channel ADAT* in/out on 8 fiber-optical connectors (TOSLINK)

• Simultaneous 32-in, 32-out audio streaming

• BNC word-clock in/out for external clock synchronization?in/out switchable

• Perfect for studio and live recordings on HD recorders with ADAT interface

• High-speed 24-bit signal transmission at 48 or 44.1 kHz for ultimate signal integrity

• Light-pipe fiber-optic connections to prevent ground loop interference

• External clock synchronization to any of the 4 Toslink inputs possible

• Designed and engineered in Germany

• 32-channel 48 kHz, bi-directional audio interface for Dante* IP networks

• High-speed 24-bit signal transmission with sample-accurate synchronization and low latency

• Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS

• Mixed sample and bit rates can coexist on the same network

• Full remote control of X32 possible using the integrated Ethernet switch

• Audinate* Dante Controller application?with full control over configuration and signal routing among all Dante-enabled devices

• Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at www.audinate.com)

• Secondary connection can be configured for seamless redundant audio networking

• Designed and engineered in Germany

• 32-channel, bi-directional audio interface via MADI (AES10)

• Optical duplex SC-plugs (IEC874-19) to connect with fibre optic MADI devices

• Multimode fibre optic cable length of up to 2 km supported

• Dual BNC terminals for transmission via standard 75-Ohm coaxial cable of up to 100 m length

• BNC connectivity can be used as a redundancy network with fibre optic installations

• Console allows selecting a block of 32 out of up to 64 MADI channels

• Both MADI formats 56-channel (AES10-1991) and 64-channel (AES10-2003) supported

• Designed and engineered in Germany

• 32-channel, bi-directional audio interface via USB 2.0

• Simultaneous 32-in, 32-out audio interface for studio and live recording

• High-speed 24-bit signal transmission for ultimate signal integrity

• Seamless connection with any DAW software allows to run ?virtual sound checks?

• Allows employing your PC for ?Plug Ins? and outboard effects processing

• Ultra-low latency ASIO* drivers for Windows* PC available, compatible to Core Audio* on Mac OS*

• Enables HUI/Mackie Control* emulation for remote control of any compatible DAW software

• Designed and engineered in Germany

• Dynamic mic booster adds extra gain to your sound

• High-quality preamp provides up to +25 dB of gain

• Phantom powered with no need for external power supply

• Works with almost any dynamic or passive ribbon microphone

• Rugged, road-worthy construction for years of dependable use

• Designed and engineered in the U.K.

• ADAT* expansion module for Midas and Behringer digital consoles

• Up to 32 channels of simultaneous recording and playback @ 48 kHz

• Features 4 input and 4 output TOSLINK* optical fibre connectors

• BNC word clock input or output for external clock synchronisation

• Ideal for studio and live recordings with ADAT-equipped HD recorders

• Optical fibre connections eliminate ground loop interference

• Designed and engineered in the U.K.

• Audinate Dante* expansion module for Midas and Behringer digital consoles

• Up to 32 bidirectional channels @ 48 kHz

• Enables multichannel recording and playback via Dante Virtual Soundcard* (PC or Mac* computer)

• Primary and secondary Ethernet interfaces for dual-redundant Dante networking

• Operates from internal Dante network Precision Time Protocol (PTP) clock

• Optional Dante Controller software for remote configuration (PC or Mac* computer)

• LED indicators monitor network activity and speed

• Designed and engineered in the U.K.

• USB 2.0 expansion module for Midas and Behringer digital consoles

• 32-channel live recording and playback on dual SD/SDHC cards

• Up to 3 hours of 48 kHz/32-bit PCM recording of 32 channels in one session, stored as uncompressed WAV files

• Up to 32 bidirectional channels @ 48 kHz of recording and playback

• Independent operation of SD cards and USB recording / playback

• Remote control via PC, Android* or iPad* apps, assignable controls or compatible hardware control surfaces, such as the Behringer X-TOUCH

• Dual SD card slots to keep virtual sound check and live performance files separately available or for extended recording time

• Sample-accurate automatic spanning feature allows extending a session across both SD cards for more than 12 hours of 8-track recording time non-stop

• Instantaneous live playback with preload and markers in the console UI and remote apps

• Markers can be set on the fly for identifying song positions while recording or playing back

• All markers can be edited directly in the console GUI

• Seamless computer integration for virtual sound checks and software plug-ins

• Channel routing can be stored and automated for record/playback

• Secure file handling in the event of power blackout (optional CR123A Lithium cell required)

• Enables remote control of compatible DAW software via emulations of Mackie Control* and HUI* protocols

• Compatible with CoreAudio on Mac OSX* - ultra-low latency ASIO* drivers for Windows* PC available

• Designed and engineered in the U.K.